1964 Mini Cooper 970S

1964 970cc Cooper S rebuild 4This 1964 970cc Cooper S was bought in to the workshop for a total restoration. The first job was to strip the car to a bare shell. The shell was then sandblasted so we could see what repairs were needed.

With new wings, inner and outer A panels, door steps, inner and outer sills, complete floor pans, boot floor, seat squab, scuttle panel, rear damper mounts, rear valance and various repairs the shell was then painted in Fiesta Yellow.

All of the standard hydrolastic suspension was then fully overhauled and refitted to the shell along with rebuilt Cooper S engine, new interior, wiring loom, original Speedwell wheels and rev counter.

After a full suspension set up and road test the car was delivered to the customer who could not believe the transformation.

Similar Posts

  • 1965 MK1 Mini

    We recently had a customer visit us with a 1965 MK1 Mini for appraisal of its bodywork. After a check over it soon became apparent that it required a full restoration. After the customer stripped the car to a bare shell the major reconstruction work could then be carried out. The bodyshell benifitted from having…

  • 1960s series 3 Lambretta

    This scooter is a part restored project that has been taken over by another owner. We dry assembled the scooter to see what parts were missing, broken and unserviceable before taking it apart again so some of the panels could be painted and the suspension , steering, brakes and engine can be rebuilt.

  • MK2 Mini Cooper S Snowberry white

    McNair Motorsport had a MK2 Cooper S dropped off at our workshop for a full restoration. After the car was stripped back to a bare bodyshell it was evaluated and the necessary body panels were ordered. With new front wings, front panel, rear valence, front and rear floors, inner sills, outer sills and various repair…

  • Pingu Mini Restoration

    We were contacted by Victoria who’s mini “Pingu” needed restoring after it had seen quite a few bad repairs over the years. The first job was to media blast the shell so we could see all the issues. The shell had seen some ingenious bodges in its life and required a few panels. The list…

  • Lambretta Street Racer

    We are currently in the process of building a series 3 Lambretta in to a street racer the object is to try and get as close to 100mph as we can. The scooter was stripped and sand blasted before the frame had some strengthening and modification carried out to it. To keep the weight down…

  • late Mini Cooper

    A late Mini Cooper was delivered to the workshop. This car had become a stalled project and the owner struggling to find a way forward. The first thing was to strip the car and then modify some of the panel work. The rear arches were tubbed to allow for a low ride height, the rear…